Blog
Mould and damp on walls: causes and treatment.
· 5 min read · H.M. Pinturas
Mould on walls is always a sign of too much water: treating the stain without treating the damp that feeds it only puts it off. In this guide we explain where damp in walls comes from, how to clean mould, which paint is best for damp interiors and when you need to go further than painting.

Why does mould appear on walls?
Mould appears wherever a surface stays damp for long enough: water in the materials is the main factor in fungal growth, and the normal dust in a home is enough to feed it. In most homes, that water comes from condensation on cold walls.
That is the conclusion of the World Health Organization guidelines on indoor dampness and mould: microorganisms are everywhere and multiply quickly wherever there is water. That is why mould tends to appear in ceiling corners, behind furniture against outside walls and around windows, where surfaces are colder.
Where does damp in walls come from?
Damp in walls has three main sources: condensation of water vapour from indoor air, water getting in from rain or leaks, and rising damp from the ground. Each has different signs and treatment, and the first step is knowing which one you have.
| Type | Typical signs | Treatment |
|---|---|---|
| Condensation | Black spots in corners, on ceilings and window frames, worse in winter | Ventilation, insulation and fixing thermal bridges |
| Penetrating damp | A stain that grows after rain or near pipes | Repair the facade, roof or leak before painting |
| Rising damp | A damp band at the base of the wall and salt deposits (white salts) | Remove the salts and damaged render and repair the render |
According to the WHO, apart from leaks, heavy rain and flooding, most moisture enters the home with the air and with the activities of the occupants, such as cooking, showering or drying clothes. Condensation forms when a surface is colder than the air: thermal bridges, poor insulation, cold water pipes and cold parts of air conditioning bring the surface below the dew point.
Is mould on walls bad for your health?
Yes: people who live in damp or mouldy homes are at greater risk of respiratory symptoms, respiratory infections and worsening asthma. The WHO recommends preventing persistent damp and, when it appears, eliminating it.
The WHO guidelines add that people with allergies are particularly sensitive and that, in coastal areas and river valleys, damp conditions can be much more severe than the national average. That is the case for homes along the Algarve coast.
How do you remove mould from walls?
Wash the area with bleach diluted in water (1:10) to whiten the stains, rinse well and apply a fungicidal solution, leaving it to work for at least 24 hours before painting. Painting straight over the mould does not solve the problem.
That is the procedure for interior walls in the technical datasheet for Barbot Biochoque Cleaning Solution, which also says to protect window frames and wear personal protective equipment. After cleaning, the Branco Total paint datasheet says to treat the wall as a new paint job: primer and two to three finishing coats.
The wall must be dry before painting. The Branco Total datasheet states substrate moisture below 5 %, relative air humidity below 80 % and the surface 2 to 3 °C above the dew point, conditions that can only be measured on site.
Which paint is best for damp interiors?
A water-based paint protected against fungi, applied to a clean, disinfected and primed wall, with a satin finish in kitchens and bathrooms because it is tougher and washable. In rooms most prone to mould, the paint can be reinforced with an anti-fungal additive.
Barbot Branco Total, for example, is a matt interior paint protected against fungal growth, and its datasheet recommends reinforcing it with an anti-fungal additive in the most prone areas, at a dose of 5 % by volume. We work with brands such as CIN, Robbialac, Barbot and Titan and choose the product for each room.
Without treating the source of the damp, no paint works miracles. What anti-fungal paint does is delay the return of the stains on a wall that is already dry and healthy. For mould and algae outdoors, see the guide on the best paint for exterior facades.
Does anti-damp paint solve the problem?
Not on its own: paint protects the surface, but it does not remove the water that feeds the mould. You need to control the temperature and ventilation of the home and, where there are thermal bridges, leaks or rising damp, fix them before painting.
The WHO says that a well-designed, well-built and well-maintained building envelope is essential to prevent damp and mould, because it avoids thermal bridges and water getting in. When the cold wall is the cause, insulating the facade from the outside with Capoto (ETICS) keeps the inner wall warmer and stops condensation.
With salt deposits, the Barbot datasheet says to remove all loose paint, brush the wall well to remove the salts and repair the damaged render before painting.
How do you prevent condensation at home?
Ventilate every room, with no pockets of still air, and remove steam at the source when cooking and showering. Keep the walls warm, with insulation and no thermal bridges, so they do not drop below the dew point.
The WHO guidelines call for ventilation well distributed through every space and state that relative humidity can be controlled with ventilation or air conditioning. To keep dust mites in check, which need relative humidity above 45 to 50 %, they recommend keeping it below that level in the heating season.
When should you call a professional?
When the stains come back soon after cleaning, cover large areas, appear with salt deposits or crumbling render, or show up after rain. In those cases there is a cause still to be fixed, and painting again only repeats the problem.
In interior painting with damp and mould, we find the cause, apply fungicides and stain-blocking primers and finish with paints made for damp rooms, so the stains do not come back. All our work has a 5-year guarantee.

